Description
Rule-Mate 1500 GPH 12 Volt Fully Automated Bilge Pump
The Rule-Mate 1500 GPH pump consists of a powerful Rule bilge pump and a highly intelligent circuit board in a single housing. The pump activated when the water reaches 2-1/2″ and automatically shuts off when the pump senses no water against the impeller, reducing the remaining water to approximately 5/8″.
ttt
Rule-Mate Intelligence
Rule-Mate Bilge pumps have built-in programming that can sense when the pump is running but not pumping water. This is a very unique feature to bilge pumps because it protects the pump and the vessel, especially the vessels batteries. If debris fouls the sensor or the pump becomes air-bound, the pump will stop running and begin to “check” for water every 2-1/2 minutes. Once the debris is removed, the pump will revert to its normal operation, turning on when the water reaches 2-1/2″ and shutting off at 5/8″.
- 1500 GPH (6819 LPH) at 0′ (13.6V)
- All-in-one pump and switch
- Extra long life heavy duty motor
- 1″ NPS discharge with 1″ AND 1 1/8″ screw-on ports
- Three year warranty
WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
Specifications:
- Volts: 12v
- Operation: Automatic
- Gallons Per Minute: 25 GPM
- Gallons Per Hour: 1500 GPH
- Type: Electric
- Box Dimensions: 5″H x 7″W x 8″L WT: 4.3 lbs
- UPC: 042237114198
Owner’s Manual (pdf)
