Description
Rule 900GPH LoPro Bilge Pump LP900S
- The Rule LoPro LP900S Automatic Bilge Pump is a low profile pump with 900 gallons per hour capacity
- Designed for tight spaces, the height of the pump is only 2-1/4″
- It features a threaded discharge nozzle to which you can attach either the included straight or 90 fitting
- Multiple ports are available for this pump
- All ports are included
- 3/4″ Straight
- 3/4″ Right angle
- 1″ and 1-1/8″
- It also includes a tricuspid check valve for the straight fitting which can be used to minimize the back flow of water
- The entire discharge body swivels up to 180 for ease of installation
- The hose can also swivel 360 for better routing
- The LoPro LP900S has (2) Automated settings, enabling the pump to turn on when the water reaches either 2″ or 1.3″
- High or Low Water Sensing Mode:
- The pump starts when water reaches a 2″ level
- By turning the motor cartridge upside down, the sensor is set at 1.3″
- Electronic Automatic Mode:
- The pump automatically turns on every 2.5 minutes to check for water, and if it’s detected the pump stays on until the water is gone
- High or Low Water Sensing Mode:
Specifications:
- Voltage: 12 Volt DC
- Flow: 900 GPH open flow at 13.6 Volts
- Amp Draw: 4 Amp approx
- Protection: TCO
- Port Configuration: 3/4″, 1″, 1-1/8″ Straight, 90 degree 3/4″
- Backflow preventer valve can be used with straight fittings
- Dimension:
- Height: 2.3″
- Length: 9.3″
- Width: 2.3″
